Home Decorating with Interesting Tips

Home improvement as well as home decoration requires considerable knowledge of some tips and tricks in handling it. The selection of colors, furniture to the right interior design will make the house look alive and luxurious

You are here: Home - Kitchen Improvement - Kitchen Worktops – How to cut them and install kitchen sink


Kitchen Worktops – How to cut them and install kitchen sink

If you are planning to install kitchen sink, then make sure that you cut the kitchen worktops effectively and avoid any damages.

The kitchen remodeling project is incomplete without a stylish worktop. A good quality worktop is easy to maintain and install. The kitchen worktops play a crucial role in the everyday activities. One has to install stoves, sink and other units on its surface. Hence, the stone is cut to the respective size so that it can fit in the kitchen accessory.

However, you need to follow an effective strategy while cutting the kitchen worktops. The technique is given below:

Firstly, measure the area of the kitchen sink. The standard size of the kitchen sink is 33 x 22 inches. Make a mark of 32 and 21 on the worktop with help of a marker. Don’t forget to render a circular edge to the corners. This facilitates the setting of kitchen sink on the worktop. You should use a skill saw to cut the kitchen worktops. Cut the tiles from bottom and hold the cut out with two nails. This ensures that the tiles do not chip the plastic when you are done with the cutting process. You can also use a jig saw to even out the edges in a round shape. Make sure that the task is done carefully. A minor mistake can ruin the complete installation process. You should remove the cut out, once you have installed the worktop perfectly. You can buy a masking tape to lay the sink properly. It adds strength to the sink and prevents chips and damage. You can also find mask tapes that can’t be seen. If you find it difficult to handle skill saw, then you can use a jig saw. You can make the process easier by drilling the worktop near the markings. Remember, to cut the tile surface within the mark.

The process is quite tedious; hence it is beneficial to appoint a specialist for the job. This ensures that the kitchen worktops are cut effectively without any errors.